Crank Press - DA250D~500D

Home > Products > Crank Press > DA250D~500D > Specification

Double Crank Press

TYPE			DA-250D	DA-350D	DA-500D
Capacity (T)			250	350	500
Capacity (Above lower dead point) (mm)			10	10	10
Stroke (mm)			300	300	300
No Of Stroke (SPM)			24	24	24
Die Height (mm)			600	650	650
Slide Adjustment (mm)			160	200	200
Slide Area (mmxmm)		LR	1820	1820	2500
Slide Area (mmxmm)		FB	1000	1200	1200
Bolster Area (mmxmm)		LR	2000	2000	2500
Bolster Area (mmxmm)		FB	1200	1220	1400
Height Of Operation (mm)			750	750	750
Main Motor (HPxP)			25x4	30x4	60x4
Adjust Motor (HPxP)			3x6	3x6	5x6
Die Cushion Capacity (T)			16x2=32	24x2=48	35x2=70
Stroke (mm)			150	150	150
Die Cushion Area (mmxmm)		LR	800	800	950
Die Cushion Area (mmxmm)		FB	680	680	950
No. Of Die Cushion			2	2	2
Machine Length (mm)			3270	3280	4100
Machine width (mm)			2350	2550	2810
Machine Height (mm)			5485	5775	6890
It there is any alteration of this specification. Please do in accordance with the draft design.
TYPE			DA-250D	DA-350D	DA-500D
Machine	Left/Right Size	A	2860	2920	3740
		C	1630	1635	2045
		D	1640	1645	2055
		G	3270	3280	4100
	Front/Back Size	B	1950	1950	2800
		B	650	700	900
		O	1520	1520	2000
		J	990	990	1080
		K	1360	1360	1730
		R	2350	2350	2180
	Height Size	H	680	750	630
		H₁	5010	5135	5860
		H₂	995	1220	2000
		TH	6005	6355	7860
	Foundation Size	E	2450	2450	3250
		F	1800	1800	2640
		d	55Ø	55Ø	65Ø
Bolster	Size	L₁	2000	2000	2500
		M	1200	1220	1400
		P₁	300	300	300
		d₁	25.2Ø	25.2Ø	32.2Ø
		T	150	170	250
Die Cushion	Size	U	800	800	950
		W	680	680	950
		P	150	150	150
Slide	Size	L₂	1820	1820	2500
		N	1000	1220	1220
		P₂	300	300	300
		I	450	450	525
		Q	150	150	150
*Specifications shown are subject to change without notice for improvement purpose.

» Relative Product :