CD Double Crank Press

»Home»Products»Crank Press»CD Double Crank Press

CD Double Crank Press

Image of CD Double Crank Press

Prosperous CD Double Crank Press

The Prosperous CD type double crank press has a highly rational design which maintains both safety and accuracy and makes is suitable for use in a wide range of pressing operations.
It is the ideal press for transfer processing progressive and automated production.

Maintenance of High Accuracy

The frame is rationally designed with a steel plate welded construction which gives it high rigidity. The side is a box type construction with a eight-side guide which assures special strength against eccentric loads and a high dynamic accuracy.

Powerful and Quiet Drive Unit

The powerful compact drive unit is accommodated in an oil bath. The sliding parts are all automatically lubricated and quiet operation is assured.

Oil-type clutch and Brake

The clutch and brake are of multiple construction with sintered alloy used in the lining. Operation is in an oil bath so that the life is long and adjustments are not required. Because of this excellent clutch and brake, the press is very responsive to intermittent operation and emergency stops which are indispensable connection with automated operation. The press can be used with confidence because all of the solenoid valves are of the double type.

Oil-hydraulic Overload Protector

This protector is incorporated in the slide to prevent overloads and it offers complete protection for all mechanisms and dies. When an overload occurs, the oil hydraulic pressure is auto-magically cut off and the press is stopped. Rapid restarting is possible.

Slide Knock-out Device (Optional)

This is a pneumatic knock-out device, it is lightly convenient for automated operation since the knock-out position can be selected optionally with rotary arm.

TYPE CD-120L CD-160L CD-220L CD-260L
Capacity (tons) 120 160 220 260
Capacity (Above lower dead point) (mm) 8 8 6.5 5
Stroke (mm) 180 200 220 220
No Of Stroke (SPM) 50 40 35 30
Die Height (mm) 400 460 460 460
Slide Adjustment (mm) 100 100 100 100
Slide Area (mm) LR 1400 1600 1800 1800
FB 500 580 650 650
Bolster Area (mm) LR 1900 2150 2400 2400
FB 620 760 820 860
Thickness 115 130 150 165
Distance From Floor To Bolster Upper Surface (mm) 900 900 1000 1200
Main Motor (HP) 15 20 25 30
Back Opening (mm) 1440 1650 1870 1870
Bed Opening (mm) LR 1300 1500 1720 1720
FB 440 470 500 500
Opening Pneumatic Pressure (kg/cm²) 5 5 5 5
Machine Height (mm) 3130 3300 3900 3900
Machine Length (mm) 2130 2340 2590 2650
Machine Width (mm) 1950 2140 2350 2450
* If there is any alteration of this specification. Please do in accordance with the draft design.

Image of CD Double Crank Press - Specification

TYPE CD-120L CD-160L CD-220L CD-260L
Left/ Right Size A 2000 2250 2250 2250
B 1900 2150 2400 2400
F 1840 2130 2360 2360
O 1440 1650 1840 1840
W 2130 2340 2590 2590
Front/Rear Size C 680 760 850 850
E 1150 1250 1400 1500
G 1611 1730 1950 2095
L 1950 2140 2350 2450
Height Size H 3130 3300 3900 3900
I 900 900 1000 1000
Die Height D 400 460 460 460
Basic Size Z Ø36 Ø36 Ø36 Ø36
M 100 150 150 150
N 130 160 160 160
*Specifications shown are subject to change without notice for improvement purpose.

Page Up